This week I was commissioned to make a collar for an energy healer. She has a herkimer diamond that she wears 24/7, and her previous collar (not by me) broke after many years of taking it off and putting it on.
She wanted the new collar to incorporate gold-filled and silver, to represent sun/moon and male/female energy. I added 11 bindings (master number 11 represents intuition), and with the exception of the binding at the base of the “V”, each of the bindings is a multiple of 3.
After finishing the locket in Week 11 I said I wasn’t going to work on one of these again for a while, but the idea for this piece refused to stay quietly in the recesses of my mind.
I’ve been thinking a lot about secrets. What private little treasures do we wear close to our hearts? A note from a lover, or a totem object? Does it contain a memory or a reminder? The wearer gets to choose.
I love the shape of amphorae – very sensuous and feminine! The construction was another learning experience – not the least reason being that I actually made the clasp properly this time. Naturally, I now have ideas for two other projects I want to make, but those definitely have to wait until after the studio tour.
Currently available at: META4 GalleryMore photos:
|
|
|
By chance I’m following the YOJ theme again this week, which is “Complementary Colours”. Ruby can be found in combination with several other metamorphic stones, namely fuschite and thulite, but my favourite is ruby in zoisite. I picked up this cab, with its rich wine red and splash of sparkly green, at the Toronto Gem Show last year.
I’m a minimalist where bezel setting stones is concerned. Time and again, I have avoided the “frilly” and cage-like settings for which wirework tends to be known in favour of something simpler that lets the stone take centre stage.
There’s something about each stone I buy that has really attracted me. This is one that begs to be held and stroked. It has a very calming energy that makes it an excellent touchstone for meditation. I’ve left the back of the stone open so that it can be closer to the skin when worn.
So far in this Year of Jewelry I haven’t been following any of the themes, but this week’s theme, Made from Two Feet of Wire, was intriguing. The design constraint – using only two feet of wire total, regardless of embellishment – offered many possibilities. I decided to focus on earrings. This pair was the first result that best met the criteria. I tried various permutations of thicker and thinner wire, some of which produced interesting designs, but used either substantially less or more wire. It turned out to be a fruitful week! Happily, I’m also caught up again!
Since that time I’ve been puzzling over an alternative solution, because I’m determined to make another attempt. Towards the end of January, I was looking at wirework on Flickr and came across Mary Tucker’s trinket boxes. I wrote to complement her on the elegant solution she had found to her hinges and closures and asked if I could borrow the idea. She graciously directed me to the tutorial she’d posted on her blog. She also recently had another version of the tutorial published in Step-by-Step Wire Jewelry.
I will likely come back to this at a later time and rework it. The result I got here is not quite as refined as I would like it to be, but given my schedule and deadlines, I can’t spend any more time on it right now. It was a very good test piece, and I’ll look forward to applying what I’ve learned to the next one.
.
.
Locket Test (2011)
Fine silver, sterling silver, snowflake obsidian, amethyst
Formed, woven, cold-joined, flameworked
L 4.7 cm x W 2.7 cm x D 1.68 cm
Wave Bracelet (2011)
Sterling silver
Formed, fused
L 17.5 cm x W 1.1 cm (variable)
I’m still behind with posting, and I’m remembering that it was at about this point last year that I gave up on the YOJ because other parts of my life were overwhelming me.
I’ve been doing interviews for the next College Review issue of MAGazine this week, and talking to the instructors in various Canadian metals programs. One of the questions I’ve been asking everyone is how they balance their academic life with their own creative work. Across the board, all have commented about how challenging it is.
At the moment, I’m juggling work on MAGazine with trying to get ready for the Lake Scugog Spring Studio Tour. I’m trying to strike a balance between production work and some more involved one-of-a-kinds. I’ve been working on a challenging woven piece for about 1 1/2 weeks now. It’s a dry run for another piece I want to make to submit to the HSTA Faculty Show in June. It’s taking up more time than I expected, and I’m becoming very conscious how quickly my deadlines are approaching.
So, I’ve had to set it aside and go back to production work.
This bracelet is a repeat of one I made for YOJ 2004-05, only more refined and simplified. I love bracelets, and this one lends itself to being worn in multiples. I made them quite small, but they are still quite loose on my wrist. Surprisingly they fit my husband’s wrist comfortably as well.
I’m still determined to keep up with YOJ, and hopefully between now and next week I’ll be caught up again.
I pulled out the spool of argentium silver while working on the week 8 project, and this pendant grew out of one of the failed attempts at embellishing the earrings.
I used to make little mini-wands with quartz points set in copper tubing and wrapped in leather for the New Age crowd. Clear quartz is regarded as an energy amplifier, and in wand form is used to direct healing energy to a specific place in the body. This updated version of the wand gives a nod to the DNA helix in the knotted spiral, and the faceted quartz bead adds a little touch of bling.
Besides a bit of coiling, I haven’t worked with the argentium silver, so this was really my first experience with it. I’m finding it a bit stiffer to work than sterling, but I’m looking forward to seeing what it can do.
Spiral Wand Pendant (2) (2011)
Argentium silver, quartz
Formed, knotted
L 3.3 cm x .5 cm (6 mm bead)
I’m late posting this week.
I had started working with this teardrop shape last week, after doing research for the next installment of my essay series. There are many historical examples of boat-shaped earrings, and I found myself paying particular attention to how they were closed. I wanted to make the earrings secure and still maintain a sleek line.
Originally my intention was to incorporate some sort of weaving, but my muse wasn’t co-operating. Time and again, I cut the bits off the frame to start over. Finally, I decided to develop the spiral idea I used on last week’s earrings.
There are so many things on my To Do List at the moment that I’m waking up in the middle of the night thinking about it. It’s one of those situations where I’m too awake to sleep, but too tired to get up. So I just lie there with my mind spinning circles and then during the day I feel exhausted and unproductive. Finally yesterday when I had a chance to sit down to work on jewelry, I couldn’t find my flow. It’s kind of ironic that I ended up with spirals – it reflects what’s going on in my over-active mind!
This week has been very satisfying, both in terms of the pieces I’ve made and the quantity of work I was able to produce. On top of it all, I had fun!
Early in the week, I was still thinking about butterflies and how they flitter and loop around each other. That lead to this pair of earrings, and a matching pendant (not shown). With our local temperatures here still below normal, spring really cannot come too soon.
I’ll be happy to see real butterflies again.
Last year, as part of the Marquise Series, I made an earring with drops that were interchangeable. I continued that thought with these butterfly drops – the briolette can be removed and exchanged for a different drop, or can be worn plain.
The rest of the week has been devoted to other production pieces, and I’m pleased to be in a good groove!
This week, after Snowpocolypse rolled through, Canada’s own Wiarton Willie brought the very welcome news that we will have a early spring this year! Woo hoo! That got me looking forward to sunshine and flowers… spring weddings and butterflies. I love watching tiny butterflies flittering around, oblivious to me being there.
I’m still in production mode, so I’m focussed on quick to make jewellery. I wanted to make something that would appeal to brides, but also to young girls. These little butterflies are lending themselves to drop earwires, like the ones shown here, but also to studs and to pendants. This is one of those rare times when the design I’ve come up with uses soldered elements. In this case, the structural requirements of the design didn’t lend itself to working cold.
I’m really looking forward to warmer weather. I’m done with the cold feet, cold hands, and sniffles that have been my constant companion since October.
I had such high hopes this week for getting a lot done. I did get a lot done, but very little of it related to what I wanted to be doing, which was making jewelry for restocking galleries and for an upcoming studio tour. Oh well. As we said when I was a kid: C’est la vie, c’est la guerre, c’est la pomme de terre…
I’m in production mode and working on things that can be quickly made. These earrings and pendant are part of a “Something Blue” casual/bridal line. The stone is aquamarine – a strand I picked up last fall at the GMCS show. I’m still on a buying moratorium but the icy opaqueness of the stone is part of what appealed to me. I have very little blue in my stone inventory, because most of the time, blue stones can’t withstand the punishment of tumbling.
I’m actively working through my stash of stones, so pendants and bracelets are also on their way!
.
This week’s entry is actually the end of a several week long process where I experimented with a different method for forming.
This is an idea I’ve been wanting to try ever since seeing a website by a British artist who made life size human figures out of wire. His name is regretfully forgotten, and the link to his website lost. What I remember the most – besides the wonderful realism of his figures – was that he built them over a solid core, which was later burned out.
Cores are often used with metal clay for making hollow forms such as boxes or beads. After some research, I bought some cork clay, and then promptly got too busy to go any further.
Cork clay is usually burned out in a kiln. Since I’m not interested in making a substantial investment for something I may not stick with, I started researching low-tech alternatives. I remembered a thread on Ganoksin about using a flower pot kiln for burning out wax. The Ganoksin archives, while vast and wide-ranging, are frustrating to search, and didn’t provide anything really helpful. Evenually, I found some basic information elsewhere online for building a flower pot kiln and went about collecting the materials to build one.
I wasn’t sure if the kiln would get hot enough to burn out the cork clay, so I made my first core out of bread dough. Since it was just an experiment, I opted to do a freeform winding of copper wire around the core.
Finding an unglazed clay pot of an appropriate size in January in Canada is a challenge. However, I did find one – and only one – at Home Depot.
Once back at home, I lined the pot with tin foil, set up the hotplate on my back deck, put a modified coffee can on the element, added the piece to be fired, covered it, and turned it on.
It smoked a lot, and stunk to high heaven, but considering it was in -12°C and blowing gusts, it worked very well! The core-free wire looks a bit like a peanut.
Because with the YOJP, a finished piece is supposed to be submitted each week, I decided to also try my hand at making some leaves with fold forming, which were then patinated using salt & ammonia. They were attached to the peanut and presto! a finished piece.
It’s not pretty, but it wasn’t intended to be. My next step will be to try again with the cork clay.
Process photos:
